Common Mistakes When Buying a Whole-House Reverse Osmosis System

If you are in the market for a whole-house reverse osmosis or water filtration system, you undoubtedly have specific goals you want to achieve. Removing a broad spectrum of contaminants and water softening capabilities probably top the list. Rather than looking only for trusted brands or the most affordable options, it is important to avoid these common mistakes before you make a purchase that affects every plumbing system in your home.

Choosing a Weaker, Non-Commercial-Grade Pump

When you shop for a residential RO system, you find products marketed specifically to homeowners and not rated for commercial properties. It makes sense. Most homes are quite a bit smaller than shops, rental buildings, office parks, and similar locations. However, when it comes to reliability, long-term use, and total cost over the lifespan, commercial-grade pumps make more sense. The stronger the system, the longer and more efficient operation you get.

Getting the Wrong Size System

Water filtration systems are partially defined by their peak capacity rated by gallons per day specifically focused on PSI and water temperature. If you get a reverse osmosis set up with a lower capacity, it will have to run more hours every day in order to deliver the filtered water your family needs. More operation equals faster breakdown. If you invest in a system rated four more gallons per day, it will only need to run a fraction of the time and will thus last longer.

Failing to Test the Water and Pretreating Properly

These types of water filtration setups do not filter everything out of your water. They are not specifically designed for water softening or removing treatment additives like chlorine. They cannot combat residue from your pipes like iron or rust, and any bacterial issues need to be handled before installation occurs. If you want your reverse osmosis system to operate optimally, you should always get your water tested first. This allows the water condition experts to recommend pretreatment options or ongoing maintenance tasks to make your water as pure and healthy as possible.

Forgetting to Make Sure the Tank Fits

Measuring the doorway, halls, and staircases the RO system tank and other equipment needs to pass through during installation seems like an obvious task. Unfortunately, some homeowners shop based on brand trustworthiness and operational measurements rather than physical ones for their home. Since you want a commercial-grade pump and an overall system large enough to minimize run time, the tanks may tend to be larger than the cheapest residential products. Measure everything and make sure you have sufficient space to install the water treatment system safely.

An RO system designed for water filtration in the home is an excellent option for those who want healthier, fresher, and safer water for drinking, bathing, cooking, and cleaning. In order to get the best results with the most efficient and long-lasting operation, avoid these common mistakes when buying a whole-house reverse osmosis system.