Section 13
Water Softener Media / Resin Tanks & Accessories
13.1: United Tanks® Media Tanks
United Tanks™ resin and media tanks are made for longevity with their high-strength fiberglass shells. The top opening features are glass filled high-density polyethylene. All tanks come with a durable base.
Features
- Tough, corrosion-resistant
- Superior quality, better than steel
- Easy installation, low maintenance
- Available in natural, blue, almond, black and gray
Applications
- Potable water, POU or POE
- Sand filters, media filters, DI tanks,
- Water softeners and conditioners
- Residential, Commercial, and Industrial
Working Parameters:
- Maximum operation temp 120°F
- Maximum working pressure: 150 psi
United Tanks® Polyglass Media Tanks (UTPG)
*Total tank volume, must leave recommended free board space according to the type of media being used
| Item | Tank Size X Diameter X Height | Total Volume* | Opening Neck Size |
| UTPG-0618-XX | 6″ X 18″ PG | 0.24 CUFT | 2.5″- 8NPSM |
| UTPG-0744-XX | 7″ X 44″ PG | 0.86 CUFT | 2.5″- 8NPSM |
| UTPG-0818-XX | 8″ X 18″ PG | 0.40 CUFT | 2.5″- 8NPSM |
| UTPG-0844-XX | 8″ X 44″ PG | 1.10 CUFT | 2.5″- 8NPSM |
| UTPG-0948-XX | 9″ X 48″ PG | 1.58 CUFT | 2.5″- 8NPSM |
| UTPG-1035-XX | 10″ X 35″ PG | 1.35 CUFT | 2.5″- 8NPSM |
| UTPG-1054-XX | 10″ X 54″ PG | 2.16 CUFT | 2.5″- 8NPSM |
| UTPG-1054DH-XX | 10″ X 54″ W/DH PG | 2.16 CUFT | 2.5″- 8NPSM |
| UTPG-1248-XX | 12″ X 48″ PG | 2.78 CUFT | 2.5″- 8NPSM |
| UTPG-1252-XX | 12″ X 52″ PG | 3.0 CUFT | 2.5″- 8NPSM |
| UTPG-1354-XX | 13″ X 54″ PG | 3.73 CUFT | 2.5″- 8NPSM |
| UTPG-1465-XX | 14″ X 65″ PG | 5.23 CUFT | 2.5″- 8NPSM |
| UTPG-1465-40-XX | 14″ X 65″ PG | 5.23 CUFT | 4″-8 UN |
| UTPG-1665-XX | 16″ X 65″ PG | 6.67 CUFT | 4″-8 UN |
| UTPG-1865-XX | 18″ X 65″ PG | 9.08 CUFT | 4″-8 UN |
| UTPG-2162-XX | 21″ X 62″ PG | 11.66 CUFT | 4″-8 UN |
| UTPG-2472-XX | 24″ X 72″ PG | 17.46 CUFT | 4″-8 UN |
| UTPG-3072-XX | 30″ X 72″ PG | 25.33 CUFT | 4″-8 UN |
| UTPG-3072-60 | 30″ X 72″ PG | 25.33 CUFT | 6″ FLG TOP |
| UTPG-3072-6060 | 30″ X 72″ PG | 25.33 CUFT | 6″ FLG TOP & 6″ FLG BOTTOM |
| UTPG-3672-60 | 36″ X 72″ PG | 35.5 CUFT | 6″ FLG TOP |
| UTPG-3672-6060 | 36″ X 72″ PG | 35.5 CUFT | 6″ FLG TOP & 6″ FLG BOTTOM |
| UTPG-4272-6060 | 42″ X 72″ PG | 46.3 CUFT | 6″ FLG TOP & 6″ FLG BOTTOM |
XX: SPECIFY COLOR UPON ORDERING: BL – BLUE ; AL – ALMOND ; BK- BLACK ; GY- GRAY ; NL- NATURAL
^ Suggested list price FOB Houston, Texas. Actual cost may vary. Subject to change without notice. Call for items not listed.
13.2: DI Polyglass Media Tanks
DI media tanks are made for longevity with their high strength fiberglass shells.
Features
- Tough, corrosion-resistant
- Superior quality, better than steel
- Easy installation, low maintenance
- Available in natural, blue, almond, black and gray
Applications
- Potable water, POU or POE
- Sand filters, media filters, DI tanks,
- Water softeners and conditioners
- Residential, Commercial, and Industrial
DI Polyglass Media Tanks
| Item | Description |
| CLK-0618-AL | DI Media Tank, 6 X 18, 2.5″ Top Almond |
| CLK-0635-AL | DI Media Tank, 6 X 35, 2.5″ Top Almond |
| CLK-1474-AL-45 | DI Media Tank, 14 X 47, 4.5″ Top, W/Rubber Base Almond |
13.3: Tank Jackets and Covers
Features
- Insulation provides protection
- Available in a variety of colors to choose from
Applications
- Polyglass resin and media tanks
- Potable water
Tank Sleeves & Covers
| Item | Description | Color | Size |
| TS-0948-AL | Plastic Round Sleeve, Requires Black Cap | Almond | 9″X48″ |
| TS-0948-WH | Plastic Round Sleeve, Requires Black Cap | White | 9″X48″ |
| TS-0948-BK | Plastic Round Sleeve, Requires Black Cap | Black | 9″X48″ |
| TS-0948-CH | Plastic Round Sleeve, Requires Black Cap | Chrome | 9″X48″ |
| TS-1054-AL | Plastic Round Sleeve, Requires Black Cap | Almond | 10″X54″ |
| TS-1054-WH | Plastic Round Sleeve, Requires Black Cap | White | 10″X54″ |
| TS-1054-BK | Plastic Round Sleeve, Requires Black Cap | Black | 10″X54″ |
| TS-1054-CH | Plastic Round Sleeve, Requires Black Cap | Chrome | 10″X54″ |
| TS-1252-AL | Plastic Round Sleeve, Requires Black Cap | Almond | 12″X52″ |
| TS-1252-WH | Plastic Round Sleeve, Requires Black Cap | White | 12″X52″ |
| TS-1252-BK | Plastic Round Sleeve, Requires Black Cap | Black | 12″X52″ |
| TS-1252-CH | Plastic Round Sleeve, Requires Black Cap | Chrome | 12″X52″ |
| TS-09PWCAP | Plastic Cap For Plastic Round Sleeves | Black | 9″ |
| TS-10PWCAP | Plastic Cap For Plastic Round Sleeves | Black | 10″ |
| TS-12PWCAP | Plastic Cap For Plastic Round Sleeves | Black | 12″ |
| TS-0948-SS | Stainless Steel Round Sleeve, Requires Black Cap | Stainless Steel | 9″X48″ |
| TS-1054-SS | Stainless Steel Round Sleeve, Requires Black Cap | Stainless Steel | 10″X54″ |
| TS-1252-SS | Stainless Steel Round Sleeve, Requires Black Cap | Stainless Steel | 12″X52″ |
| TS-09SSCAP | Plastic Cap Hd For Stainless Steel Round Sleeve Cover | Black | 9″ |
| TS-10SSCAP | Plastic Cap Hd For Stainless Steel Round Sleeve Cover | Black | 10″ |
| TS-12SSCAP | Plastic Cap Hd For Stainless Steel Round Sleeve Cover | Black | 12″ |
Tank Jackets
| Item | Description | Color | Size |
| JKT-0844SQ-AL | Plastic 1-Piece Square Jacket | Almond | 8″X44″ |
| JKT-0844SQ-BK | Plastic 1-Piece Square Jacket | Black | 8″X44″ |
| JKT-0948-AL | Plastic 1-Piece Round Jacket | Almond | 9″X48″ |
| JKT-0948-WH | Plastic 1-Piece Round Jacket | White | 9″X48″ |
| JKT-0948-BK | Plastic 1-Piece Round Jacket | Black | 9″X48″” |
| JKT-1054-AL | Plastic 1-Piece Round Jacket | Almond | 10″54″ |
| JKT-1054-WH | Plastic 1-Piece Round Jacket | White | 10″54″ |
| JKT-1054-BK | Plastic 1-Piece Round Jacket | Black | 10″54″ |
| JKT-0844-SS | Stainless Steel Full Welded 1-Piece Round Jacket | Stainless Steel | 8″X44″ |
| JKT-0948-SS | Stainless Steel Full Welded 1-Piece Round Jacket | Stainless Steel | 9″X48″ |
| JKT-1054-SS | Stainless Steel Full Welded 1-Piece Round Jacket | Stainless Steel | 10″X54″ |
| JKT-1252-SS | Stainless Steel Full Welded 1-Piece Round Jacket | Stainless Steel | 12″X52″ |
| JKT-1354-SS | Stainless Steel Full Welded 1-Piece Round Jacket | Stainless Steel | 13″X54″ |
13.4: Distributor, Baskets and Risers
Distributor Tubes, Baskets, & Risers
Features
- Durable ABS plastic distributor tubes, baskets and risers
- FDA-approved materials
Applications
- Sand filters, media filters, DI tanks
- Water softeners and conditioners
- Residential, Commercial, and Industrial
Distributor Basket
| Item | Description | Fits |
| DIST-LB-1316 | Lower “Bottom” Basket | 13/16″ Riser Pipe |
| DIST-LB-105 | Lower “Bottom” Basket | 1.05″ Riser Pipe |
Distributor Basket, Up Flow
| Item | Description | Fits |
| DIST-LB-105-UF | Lower “Bottom” Basket, Up Flow | 1.05″ Riser Pipe |
Distributor Basket, Stackable
| Item | Description | Fits |
| DIST-LB-105-ST | Lower “Bottom” Basket, Stackable | 1.05″ Riser Pipe |
Distributor Basket
| Item | Description | Fits |
| DIST-LB-32MM | Lower “Bottom” Basket | 32 Mm Riser Pipe |
| DIST-LB-150 | Lower “Bottom” Basket | 1.5″ Riser Pipe |
Distributor Basket High Flow
| Item | Description | Fits |
| DIST-LB-150HF | Lower Basket, Long Stack (High Flow) | 1.5″ Riser Pipe |
Riser Pipe – Distributor and Collectors
| Item | Description | Fits |
| DIST-RP-1316-60 | Riser Pipe – Distributor Tube 60″ | 13/16″ Riser Pipe |
| DIST-RP-1316-72 | Riser Pipe – Distributor Tube 72″ | 13/16″ Riser Pipe |
| DIST-RP-105-60 | Riser Pipe – Distributor Tube 60″ | 1.05″ Basket |
| DIST-RP-105-72 | Riser Pipe – Distributor Tube 72″ | 1.05″ Basket |
| DIST-RP-32MM-72 | Riser Pipe – Distributor Tube 72″ | 32 Mm Basket |
| DIST-RP-150-72 | Riser Pipe – Distributor Tube 72″ | 1.5″ Basket |
| DIST-UB-1316 | Upper Basket “Collector” | 13/16″ Pilot |
| DIST-UB-105 | Upper Basket “Collector” | 1.05″ Pilot |
| DIST-UB-32MM | Upper Basket “Collector” | 132 Pilot |
13.5: Media Guards
Features:
- Durable ABS plastic
- FDA-approved materials
Applications:
- Sand filters, media filters, DI tanks, Water softeners and conditioners
- Residential, Commercial, and Industrial
Media Guards
| Item | Description | Fits |
| MG4-105-F | Media Guard, 4 Cartridge – Empty | Fleck |
| MG6-105-F | Media Guard, 6 Cartridge – Empty | Fleck |
| MG4-105-C | Media Guard, 4 Cartridge – Empty | WS1 |
| MG6-105-C | Media Guard, 6 Cartridge – Empty | WS1 |
| MG4-105-A | Media Guard, 4 Cartridge – Empty | Autotrol |
| MG6-105-A | Media Guard, 6 Cartridge – Empty | Autotrol |
13.6: In-And-Out Tank Heads
Features
- Fits standard 2.5" tank openings
- Easy installation
- Economical
Applications
- Filters such as sediment removal, taste, odor or pH neutralization
- Carbon Tanks POU & POE
- Media Tanks POU & POE
In-And-Out Tank Heads
| Item | Description | Pilot | Port |
| IOTH-1316-034 | In/Out Tank Head | 13/16″ | ¾” FPT |
| IOTH-105-034 | In/Out Tank Head | 1.05″ | ¾” FPT |
| IOTH-105-100 | In/Out Tank Head | 1.05″ | 1″ FPT |
| IOTH-105-125 | In/Out Tank Head (Requires Bypass CLKV3006 And/Or Tail PCS. CLKV3007-XX) | 1.05″ | ¾” FPT |
13.7: Manual Valve Head
Features
- Multi-port Valve with filter function
- Adopt the high degree pottery, seal slice with scuff resistance, corrosion proof, perfect sealing, and long using life
- Reasonable fluid design: Service-Fast Rinse-Backwash-Fast Rinse-Service
- Small rotation angle for closing and opening, easy to operate
- It could be operating with pressure, leak proof
Applications
- Available to match with Filter housing, 2.5" opening tank and 4" opening tank
- Flow rate range: 2TPH to 10TPH
- Maximum operation temp: 120°F
- Maximum working pressure: 100 psi
Manual Valve Head
| Item | Description |
| IOTH-mv-320-100 | Manual Filter Valve Head 20 GPM, 3 Steps, 1″ FPT Port, 1.05″ Dist Pilot, 2.5″ Neck |
| IOTH-mv-327-100 | Manual Filter Valve Head 27 GPM, 3 Steps, 1″ FPT Port, 32mm Dist Pilot, 2.5″ Neck |
^ Suggested list price FOB Houston, Texas. Actual cost may vary. Subject to change without notice. Call for items not listed.
13.8 Other Media Tank Brands
Structural The non-corrosive, cost-effective solution for commercial/industrial water treatment and storage. Structural Composite Pressure Vessels offer fiberglass construction for outstanding performance and durability in harsh chemical enviroments. With capacities up to 1600 gallons and a variety of options, we can tailor a vessel to meet your needs. All Structural Composite Vessels are warranted for 5 years.
Clack Pressure tanks are made from high-performance composite material with FRP filament winding. All pressure tanks, residential and commercial, are made by a complete seamless molding technology. All thread inlet made from 30% glass filled PP provides higher strength, temperature and pressure limits versus glass filled PE.Full choice of pressure tanks from 6″ through 48″ in diameter and from 10″ to 72″ in height.
Top opening type available for 6″ through 36″ diameter pressure tanks; top and bottom opening type available for 18″ through 48″ diameter pressure tanks.
Enpress Composite Pressure Tanks. Stronger, superior and easy to sell. No other manufacturer in the world can match ENPRESS composite pressure vessels. Our exclusive co-polymer polypropylene liner design and computer controlled cut lengths keep our vessels consistent within 3/16″. No other manufacture can do that. And only ENPRESS can promise you no more custom cutting riser tubes!
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
