Section 4

4.1: Inline Sediment Filters
Inline sediment filters are typically used for reducing dirt, sand, and particles. The filter design allows for maximum holding capacity for optimal filtration.
Features:
- Reduce sediment and particles from water
- Easy and sanitary cartridge disposa
- Low pressure drop
Applications:
- Commercial and residential drinking water systems
- Pre-and post-reverse osmosis filtration
- Water coolers
- Restaurants and food service
Materials of Construction:
- Filter Media: Polypropylene
- Outer Shell: Polypropylene
- Inner Pads: Polypropylene
- Temperature Rating: 40-125°F
- Maximum Pressure: 100 psi

Inline Sediment Filters
Item | Filter Size* | Filtration Type* | In/Out Ports | Filter Life* |
IL-2010SED05-14F | 2” X 10” | 5 Micron Sediment | 1/4” FPT | 1,500 Gallons |
IL-2010SED05-14Q | 2” X 10” | 1/4” QC | ||
IL-2512SED05-14F | 2.5” X 12” | 1/4” FPT | 3,000 Gallons | |
IL-2010SED05-14Q | 2.5” X 12” | 1/4” QC |
* Specifications are nominal, intended for reference only. Filter life depends on operating conditions.
^ Suggested list price FOB Houston, Texas. Actual cost may vary. Subject to change without notice. Call for items not listed.
4.2: Inline Gac Filters
Inline coconut shell granular activated carbon (GAC) is typically used for reducing chlorine taste, odor, and organic chemicals. The filter design allows for maximum contact time for optimal chemical adsorption.
Features:
- Reduce taste/odor/chlorine and some VOC’s from water
Applications:
- Commercial and residential drinking water systems
- Pre-and post-reverse osmosis filtration
- Water coolers
- Restaurants and food service
Materials of Construction:
- Filter Media: Coconut Shell Granular activated carbon
- Outer Shell: Polypropylene
- Inner Pads: Polypropylene
- Temperature Rating: 40-125°F
- Maximum Pressure: 100 psi

Inline Gac Filters
Item | Filter Size* | Filtration Type* | In/Out Ports | Filter Life* |
IL-2006GAC-14F | 2” X 6” | Coconut Shell GAC | 1/4” FPT | 750 Gallons |
IL-2006GAC-14Q | 1/4” QC | |||
IL-2010GAC-14F | 2” X 10” | 1/4” FPT | 1,500 Gallons | |
IL-2010GAC-14Q | 1/4” QC | |||
IL-2512GAC-14F | 2.5” X 12” | 1/4” FPT | 3,000 Gallons | |
IL-2006GAC-14Q | 1/4” QC |
* Specifications are nominal, intended for reference only. Filter life depends on operating conditions.
^ Suggested list price FOB Houston, Texas. Actual cost may vary. Subject to change without notice. Call for items not listed.
4.3: Inline Specialty Filters
Inline Alkaline and Mineral filters are typically used to add minerals back into the water. Both Alkaline and Mineral filters will increase the pH and TDS of water supplied. The filter design allows for maximum contact time with various media inside.
Features:
- Increase Alkalinity, pH, and TDS of water
- Easy and sanitary cartridge disposal
- Low pressure drop
Applications:
- Residential and commercial drinking water systems
- Post reverse osmosis filtration
- Water coolers
- Restaurants and food service
Materials of Construction:
- Filter Media: Proprietary blend of natural earth stones and mineral rocks
- Outer Shell: Polypropylene
- Inner Pads: Polypropylene
- Temperature Rating: 40-125°F
- Maximum Pressure: 100 psi

Inline Specialty Filters
Item | Filter Size* | Filtration Type * | In/Out Ports | pH Boost * | Filter Life * |
SP-IL2010-ALK | 2” X 10” | Alkaline Media | 1/4” FPT | 0.5 – 1.0 | 4 – 6 Months |
SP-IL2012-MABA | 2” X 12” Clear | 1.5 – 2.0 | 6 – 9 Months | ||
SP-IL2512-ALK | 2.5” X 12” | 1.5 – 2.5 | 9-12 Months | ||
SP-IL2010-MIN | 2” X 10” | Mineralizer | 0.5 – 1.0 | 4 – 6 Months | |
SP-IL2013-MIN | 2” X 13” | 1.5 – 2.0 | 6 – 9 Months |
* Specifications are nominal, intended for reference only. Filter life depends on operating conditions.
^ Suggested list price FOB Houston, Texas. Actual cost may vary. Subject to change without notice. Call for items not listed.
4.4: Inline Empty Filters
Empty inline cartridges are blank cartridges. They could be filled and refilled. The cap has grooves for ease of hand tightening and ease of unscrewing. Filter has a built in mesh pad (separator sets) to keep media in place.
Features:
- Compact, easy to use empty inline cartridges
- Make your own cartridge with the media of your choice
- Available in 2” and 2.5” diameter
- Chose from clear transparent shell, or standard white shell
Applications:
- Well water or municipal water supplies
- POU and POE applications
- Residential, commercial, and industrial applications
Materials of Construction:
- White Shell and End Caps: Polypropylene
- Clear Shell: Polycarbonate
- Separator Sets: Polypropylene
- Gasket: EPDM
- Temperature Rating: 40-125°F

Inline Empty Filters
Item | Filter Size* | Empty Shell Color | In/Out Ports |
IL-2006EMPT-CL14F | 2” X 6” | Clear | 1/4” FPT |
IL-2006EMPT-WH14F | White | ||
IL-2010EMPT-CL14F | 2” X 10” | Clear | |
IL-2010EMPT-WH14F | White | ||
IL-2512EMPT-CL14F | 2.5” X 12” | Clear | |
IL-2512EMPT-WH14F | White | ||
IL-2010EMP-SEP-SET | 2” | Inner Separator Set | |
IL-2512EMP-SEP-SET | 2.5” |
* Specifications are nominal, intended for reference only. Filter life depends on operating conditions.
^ Suggested list price FOB Houston, Texas. Actual cost may vary. Subject to change without notice. Call for items not listed.
4.5: Other Brands of Inline Filters


K-Series Inline filters are available in 2” and 2.5” diameter that fit standard mounting clips. Come in 6”, 10”, 12”, and 14” long with a range of end ports sizes and styles. Available in a wide range of filtration media including sediment, carbon, resins, and other specialty mediums.
Q-Series quick change filters are sanitary cartridge type filters. The all-in-one design (filter & housing) are 2.5” diameter and come in different lengths. Works only on the Q-series heads.

CE-Series and ELF-Series cquick change filters are sanitary cartridge type filters. The E-Series are 2.5” diameter, and the ELF-Series are 3.5” diameter. The all-in-one design (filter & housing) come in different lengths. Works on the Omnipure E-series and ELF-series caps, and also fit replacement for compatible Everpure filter heads.
GS-210RO-MF Inline filter uses hollow fiber membrane and Fiberdyne technology to reduce bacteria and chlorine. The filter size is 2.5” X 11” and has ¼” FPT ports.

Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.